Technical datasheet
BJ5H-HS
Supplied byAdvanced Composites (Mitsui Chemicals)- Last Updated on Mar 24, 2021
BJ5H-HS by Advanced Composites (Mitsui Chemicals) is polypropylene grade. It is recommended for interior parts. It is designed for processing by injection molding method. During processing of BJ5H-HS, holding pressure should be lower than boost pressure with a minimum amount of time to prevent over-packing of the part and screw should stop 1 to 2 seconds before mold open. Lower RPM of screw is preferred for mixing and uniform melt temperature. Injection speed should be slow to medium to prevent excessive shear on the material.
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
BJ5H-HS properties
BJ5H-HS Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Barrel Nozzle Temperature | Visible After Login | Visible After Login | |
| Barrel Temperature (C1) | Visible After Login | Visible After Login | |
| Barrel Temperature (C2) | Visible After Login | Visible After Login | |
| Barrel Temperature (C3) | Visible After Login | Visible After Login | |
| Barrel Temperature (C4) | Visible After Login | Visible After Login | |
| Cushion | Visible After Login | Visible After Login | |
| Injection Pressure | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |