Technical datasheet
ADX-5023
Supplied byAdvanced Composites (Mitsui Chemicals)- Last Updated on Jul 23, 2025
ADX-5023 by Advanced Composites (Mitsui Chemicals) is scratch resistant, rubber- and impact modified polypropylene compound filled with talc. It is UV stabilized grade, exhibiting high stiffness and low temperature ductility.
- It is designed for injection molding method.
- ADX-5023 is possibly used for variety of molded-in-color automotive interior parts and pillar applications.
- During processing, holding pressure should be lower than boost pressure with a minimum amount of time to prevent over-packing of the part and screw should stop 1 to 2 seconds before mold open.
- Lower RPM of screw is preferred for mixing and uniform melt temperature.
- Injection speed should be slow to medium to prevent excessive shear on the material.
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
ADX-5023 properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Auto-ignition Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
ADX-5023 Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Barrel Nozzle Temperature | Visible After Login | Visible After Login | |
| Barrel Temperature (C1) | Visible After Login | Visible After Login | |
| Barrel Temperature (C2) | Visible After Login | Visible After Login | |
| Barrel Temperature (C3) | Visible After Login | Visible After Login | |
| Barrel Temperature (C4) | Visible After Login | Visible After Login | |
| Cushion | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Injection Pressure | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |